Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 2259

Version 8.3.2.0 Description Introduced on the E-Series TeraScale. Usage Information If no options are specified, debug is active on all interfaces and all VRRP groups. show vrrp ipv6 View the IPv6 VRRP groups that are active. If no VRRP groups are active, the Dell Networking OS returns No Active VRRP group. C9000 Series Syntax Parameters show vrrp ipv6 [vrid] [interface] [brief][vrf vrf-name] vrid interface (OPTIONAL) Enter the virtual router identifier for the VRRP group to view only that group. The range is from 1 to 255. Enter the following keywords and slot/port or number information: • For a Port Channel interface, enter the keywords portchannel then a number. The range is from 1 to 128. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information. • For a VLAN interface, enter the keyword vlan then the VLAN ID. The VLAN ID range is from 1 to 4094. brief vrf vrf-name (OPTIONAL) Enter the keyword brief to view a table of information on the VRRP groups. Enter the keyword vrf followed by the name of the VRF to view IPv6 VRRP groups corresponding to that VRF. Command Modes • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) Description Introduced on the C9010. Virtual Router Redundancy Protocol (VRRP) 2259