HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 109

BM System Messages Chapter 5 BM-1001 Message , [BM-1001], ,, ERROR, , BM protocol version in slot Probable Cause Recommended Action Severity Indicates that the software running on the CP cannot communicate with the AP blade in the indicated slot, in order to determine AP blade's firmware version. This can be due to one of the following: • The CP blade is running a much newer version than the AP blade • The CP blade is running a much older version than the AP blade The problem can be corrected by changing the version of firmware on the CP or AP blades. The firmware version on the CP blade can be changed using the firmwareDownload command. Refer to the release notes to determine whether a non-disruptive firmwareDownload is supported between the versions. As the AP and CP blades cannot communicate, it is not possible to load new firmware on the AP blade. If required, send the AP blade back to the factory to get a new firmware version installed. ERROR BM-1002 Message , [BM-1002], ,, INFO, , Connection established between CP and blade in slot Probable Cause Recommended Action Severity The CP has established a connection to the BP and can communicate. No action is required. INFO Fabric OS Message Reference 5-1 Publication Number: 53-1000242-01