HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 290

25 FW-1444 FW-1444 Message , [FW-1444], ,, WARNING, , state has changed to . Probable Cause Recommended Action Severity Indicates that the specified FRU's state has changed to "faulty". Replace the FRU. WARNING FW-1445 Message , [FW-1445], ,, INFO, , Four power supplies are now required for 2X redundancy, Switch Status Policy values changed. Probable Cause Recommended Action Severity Indicates that the switch now requires 4 power supplies and previous Switch Status Policy parameters will be overwritten to reflect this. The presence of an AP blade means that more than one power supply may be required to provide adequate power. So (even if the AP blade is powered down or removed) the Switch Status policy values will now reflect the need for 4 power supplies to maintain full (2X) redundancy. No action required, unless there are fewer than 4 power supplies active in the chassis. If there are fewer than 4, insert additional power supplies so that there are 4 active. INFO FW-1446 Message , [FW-1446], ,, WARNING, , Four power supplies now required for 2X redundancy, not enforced by Fabric Watch due to Switch Status Policy overridden by User. Probable Cause Indicates that the switch now requires 4 power supplies for full (2X) redundancy, but the user has previously overridden the Switch Status Policy values pertaining to number of power supplies. So those values will not be automatically changed. The default values with no AP blades are: 3 out of service indicates switch status is DOWN, 0 indicates no checking for switch status MARGINAL. The default values when an AP blade is or has been present are: 2 out of service indicates switch status is DOWN, 1 out of service indicates switch status is MARGINAL 25-84 Fabric OS Message Reference Publication Number: 53-1000242-01