HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 451

SEC-1311 58 SEC-1311 Message , [SEC-1311], ,, ERROR, , Security mode cannot be enabled because one or more of the password policies is not set to default value. Probable Cause Recommended Action Severity Indicates that the security enable failed on the fabric because one or more switches in the fabric have password policies that are not set to the default value. Verify that the security event was planned. If the security event was planned, run the passwdCfg --setDefault command on each switch in the fabric to set the password policies to the default value. Then verify with passwdCfg --show that passwd policies are set to the defaults on all switches and retry the secModeEnable command. ERROR SEC-1312 Message , [SEC-1312], ,, INFO, , . Probable Cause Recommended Action Severity Indicates that the passwdCfg parameters changed. Verify that the security event was planned. If the security event was planned, no action is required. If the security event was not planned, take appropriate action as defined by your enterprise security policy. INFO SEC-1313 Message , [SEC-1313], ,, INFO, , The passwdcfg parameters were set to default values. Probable Cause Recommended Action Severity Indicates that the passwdCfg parameters were set to default values. Verify that the security event was planned. If the security event was planned, no action is required. If the security event was not planned, take appropriate action as defined by your enterprise security policy. INFO Fabric OS Message Reference Publication Number: 53-1000242-01 58-57