HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 424

58 SEC-1112 SEC-1112 Message , [SEC-1112], ,, ERROR, , FCS list must be the first entry in the Active Security policies, and the same as the current active FCS list in the switch. Probable Cause Recommended Action Severity Indicates that either a security policy download is attempted with an active policy that does not have the FCS policy as the first policy or the FCS policy is not same as the current FCS policy on the switch. Make sure that the new FCS policy is the same as the current FCS policy on the switch. ERROR SEC-1115 Message , [SEC-1115], ,, ERROR, , No primary FCS to failover. Probable Indicates that during an attempted secFcsFailover, no primary FCS is present in the fabric. Cause Recommended Run the secFabricShow command to verify that all switches in fabric are in the ready state. When all Action switches are in the ready state, retry the operation. Severity ERROR SEC-1116 Message , [SEC-1116], ,, ERROR, , Fail to commit failover. Probable Cause Recommended Action Severity Indicates that there has been a corruption during the distribution of the security database. This can only occur when the primary FCS is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. ERROR 58-30 Fabric OS Message Reference Publication Number: 53-1000242-01