HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 266

25 FW-1340 Probable Cause Recommended Action Severity Indicates that the number of DCC violations has changed from a value outside of the acceptable range to a value within the acceptable range. DCC violations indicate that an unauthorized device tried to join the fabric. The DCC_POLICY allows for the specification of rules for binding device ports (typically HBA ports) to specific switch ports. DCC policies ensure that whenever a device performs an FLOGI request that the WWN specified in the FLOGI is validated to be connected to the authorized port. Enforcement for private loop devices not performing FLOGI is done through the name server. No action is required. INFO FW-1340 Message , [FW-1340], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Recommended Action Severity Indicates that the number of login violations has changed. Login violations indicate that a login failure has been detected. Run the errShow command to determine the IP location of the login attempt. Responses to securityclass messages depend on user policies. Consult your security administrator for response strategies and policies. INFO FW-1341 Message , [FW-1341], ,, INFO, , , is below low boundary(High=, Low=). Current value is . Probable Cause Recommended Action Severity Indicates that the number of login violations has fallen below the low boundary. Login violations indicate that a login failure has been detected. No action is required. INFO 25-60 Fabric OS Message Reference Publication Number: 53-1000242-01