HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 231

FW-1165 25 FW-1165 Message , [FW-1165], ,, INFO, , , , is below low boundary(High=, Low=). Current value is . Probable Cause Recommended Action Severity Indicates that the number of synchronization losses that the port experiences has fallen below the low boundary. Loss of synchronization errors frequently occur due to a faulty SFP or cable. Signal losses often create synchronization losses. No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. A low number of synchronization losses means that the switch is functioning normally. INFO FW-1166 Message , [FW-1166], ,, WARNING, , , , is above high boundary(High=, Low=). Current value is . Probable Cause Recommended Action Severity Indicates that the number of synchronization losses that the port experiences has risen above the high boundary. Loss-of-synchronization errors frequently occur due to a faulty SFP or cable. Signal losses often create synchronization losses. Check both ends of your cable connection. Verify that the cable and SFPs are not faulty. If you continue to experience loss-of-synchronization errors, troubleshoot your HBA and contact your switch service provider. WARNING FW-1167 Message , [FW-1167], ,, INFO, , , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the number of synchronization losses that the port experiences has changed from a value outside of the acceptable range to a value within the acceptable range. Loss of synchronization errors frequently occur due to a faulty SFP or cable. Signal losses often create synchronization losses. Fabric OS Message Reference Publication Number: 53-1000242-01 25-25