HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 415

SEC-1083 58 SEC-1083 Message , [SEC-1083], ,, ERROR, , Name already exists. Probable Cause Recommended Action Severity Indicates that there has been a corruption during the distribution of the security database. This can only occur when the primary FCS is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. ERROR SEC-1084 Message , [SEC-1084], ,, ERROR, , Name exists for different type . Probable Indicates that the specified policy already exists. Cause Recommended No action is required. Action Severity ERROR SEC-1085 Message , [SEC-1085], ,, ERROR, , Failed to create . Probable Cause Recommended Action Severity Indicates that the security policy was not created. Check that the current policy configuration is valid. For example, the RSNMP policy cannot exist without the WSNMP policy. ERROR Fabric OS Message Reference Publication Number: 53-1000242-01 58-21