HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 481

TRCE-1006 65 TRCE-1006 Message , [TRCE-1006], ,, INFO, , FTP Connectivity Test succeeded to FTP site ' '. Probable Cause Recommended Action Severity Indicates that a connectivity test to the FTP host has succeeded. This feature is enabled by the supportFtp -t command. No action is required. INFO TRCE-1007 Message , [TRCE-1007], ,, ERROR, , Notification of this CP has failed. Parameters temporarily out of synch with other CP. Probable Cause Recommended Action Severity Indicates that the active CP is unable to alert the standby CP of a change in trace status. This message is only applicable to the SilkWorm 12000, 24000, and 48000. This message is often transitory. Wait a few minutes and try the command again. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. ERROR TRCE-1008 Message , [TRCE-1008], , FFDC, CRITICAL, , Unable to load trace parameters. Probable Cause Recommended Action Indicates that the active CP is unable to read stored trace parameters. Reboot the CP (dual-CP system) or restart the switch. Run traceFtp to set up for automatic FTP transfers. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Fabric OS Message Reference Publication Number: 53-1000242-01 65-3