HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 192

19 FICU-1003 FICU-1003 Message , [FICU-1003], ,, WARNING, , : FICON-CUP License Not Installed () Probable Cause Recommended Action Severity Indicates that the FICON-CUP license is not installed on the switch. Run the licenseShow command to check the installed licenses on the switch. The switch cannot be managed using FICON-CUP commands until the FICON-CUP license is installed. Contact your switch supplier for a FICON-CUP license. Run the licenseAdd command to add the license to your switch. WARNING FICU-1004 Message , [FICU-1004], ,, WARNING, , : Failed to set FMS mode: conflicting PID Format:, FMS Mode: Probable Cause Recommended Action Severity Indicates that a PID format conflict was encountered. The core PID format is required for FICON-CUP. The pid_format variable displays the PID format currently running on the fabric, and is one of the following: • 0 is VC-encoded PID format • 1 is core PID format • 2 is extended-edge PID format FMS mode displays whether FICON Management Server mode is enabled; a 0 means this mode is enabled and a 1 means this mode is disabled. For FICON Management Server mode (fmsMode) to be enabled, the core PID format must be used in the fabric. Change the PID format to core PID using the configure command and reenable fmsmode using the ficoCupSset command. Refer to the Fabric OS Administrator's Guide for information on core PID mode and the Fabric OS Command Reference for information on the configure command and ficonCupSet command. WARNING 19-2 Fabric OS Message Reference Publication Number: 53-1000242-01