HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 194

19 FICU-1008 FICU-1008 Message , [FICU-1008], ,, WARNING, , FMS mode has been enabled. Port(s): have been disabled due to port address conflict. Probable Cause Recommended Action Severity Indicates that the specified port(s) were disabled when FICON Management Server mode (fmsMode) was enabled. This is due to port address conflict or port address being reserved for CUP management port No action is required. WARNING FICU-1009 Message , [FICU-1009], ,, WARNING, , FMS Mode enable failed due to insufficient frame filtering resources on some ports Probable Cause Recommended Action Severity Indicates that the frame filtering resources required to enable FICON Management Server mode (fmsMode) were not available on some of the ports. Use the perfDelFilterMonitor command to delete the filter-based performance monitors used on all ports to free up the resources. WARNING FICU-1010 Message , [FICU-1010], ,, WARNING, , FMS Mode enable failed due to address conflict with port Probable Indicates that the FICON Management Server mode (fmsMode) was not enabled because the specified Cause port which has an address conflict with the CUP management port is in use. Recommended Use the portDisable command to disable the specified port to avoid the port address conflict. Action Severity WARNING 19-4 Fabric OS Message Reference Publication Number: 53-1000242-01