HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 94

3 BL-1003 Probable Cause Recommended Action Severity Indicates that the blade initiation failed because one or more of the internal ports was not online. The blade is faulted. Make sure that the blade is seated correctly. If the blade is seated correctly, reboot or power cycle the blade. Run the systemVerification command to verify that the blade does not have hardware problems. Refer to the Fabric OS Command Reference for more information on this command. Additional blade fault messages precede and follow this error, providing more information. See other error messages for recommended action. If the message persists, replace the blade. CRITICAL BL-1003 Message , [BL-1003], , FFDC, CRITICAL, , Faulting blade in slot Probable Cause Recommended Action Severity Indicates a faulty blade in the specified slot number. Make sure that the blade is seated correctly. If the blade is seated correctly, reboot or power cycle the blade. Run the systemVerification command to verify that blade does not have hardware problems. Refer to the Fabric OS Command Reference for more information on this command. If the message persists, replace the blade. CRITICAL BL-1004 Message , [BL-1004], , FFDC, CRITICAL, , Suppressing blade fault in slot Probable Cause Recommended Action Severity Indicates that the specified blade experienced a failure but was not faulted due to a user setting. Reboot or power cycle the blade, using the slotPowerOff and slotPowerOn commands. Run the systemVerification command to verify that the blade does not have hardware problems. Refer to the Fabric OS Command Reference for more information on this command. If the message persists, replace the blade. CRITICAL 3-2 Fabric OS Message Reference Publication Number: 53-1000242-01