HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 128

9 EM-1028 Recommended Action Severity Either change the chassisConfig option to 1 with the chassisConfig command, or upgrade the firmware on the standby to the version running on the active CP. WARNING EM-1028 Message , [EM-1028], , FFDC, CRITICAL, , HIL Error: failed to access history log for FRU: (rc=). Probable Cause Recommended Action Severity Indicates a problem accessing the data on the WWN card FRU or the WWN card storage area on the main logic board. The problems were encountered when the software attempted to write to the history log storage to record an event for the specified FRU. The return code is for internal use only. This is a serious hardware problem. The FRU ID value is composed of a FRU type string and an optional number to identify the unit, slot, or port. If the message persists, reboot or power cycle the switch. If the message still persists, replace the WWN card, or the switch (for nonbladed switches). CRITICAL EM-1029 Message , [EM-1029], ,, WARNING, , , a problem occurred accessing a device on the I2C bus (). Operational status () not changed, access is being retried. Probable Cause Recommended Action Severity Indicates that the I2C bus had problems and a timeout occurred. This is often a transient error. Watch for the EM-1048 message, which indicates that the problem has been resolved. If the error persists, check for loose or dirty connections. Remove all dust and debris prior to reseating the FRU. If it continues to fail, replace the FRU. WARNING 9-8 Fabric OS Message Reference Publication Number: 53-1000242-01