HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 95

BL-1006 3 BL-1006 Message , [BL-1006], ,, INFO, , Blade NOT faulted. Peer blade experienced abrupt failure. Probable Cause Recommended Action Severity Indicates that the errors (mostly synchronization errors) on this blade are harmless. Probably, the standby CP blade connected to the active CP blade has experienced transitory problems. Verify that the standby CP is healthy. If the standby CP was removed or faulted by user intervention, no action is required. INFO BL-1007 Message , [BL-1007], ,, WARNING, , blade #: blade state is inconsistent with EM. bl_cflags 0x, slot_on , slot_off , faulty , status Probable Cause Recommended Action Severity Indicates that a failover occurred while a blade was initializing on the previously active CP. No action is required. The blade is reinitialized. Because reinitializing a blade is a disruptive operation and can stop I/O traffic, you might have to stop and restart the traffic during this process. WARNING BL-1008 Message , [BL-1008], , FFDC, CRITICAL, , Slot control-plane failure. Expected value: 0x, Actual: 0x Probable Cause Recommended Action Indicates that the blade has experienced a hardware failure or was removed without following the recommended removal procedure. Make sure that the blade is seated correctly. If the blade is seated correctly, reboot or power cycle the blade. Run the systemVerification command to verify that the blade does not have hardware problems. Refer to the Fabric OS Command Reference for more information on this command. Fabric OS Message Reference 3-3 Publication Number: 53-1000242-01