HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 425

SEC-1117 58 SEC-1117 Message , [SEC-1117], ,, INFO, , Fail to set . Probable Cause Recommended Action Severity Indicates that the switch failed to save the data received by the primary FCS switch. This data can be an FCS password, a non-FCS password, SNMP data, or multiple user authentication data. Run the secFabricShow command to verify that all switches in fabric are in the ready state. When all switches are in the ready state, retry the operation. INFO SEC-1118 Message , [SEC-1118], ,, INFO, , Fail to set SNMP string. Probable Cause Recommended Action Severity Indicates that the SNMP string could not be set. Usually this problem is transient. Retry the command. INFO SEC-1119 Message , [SEC-1119], ,, INFO, , Secure mode has been enabled. Probable Cause Recommended Action Severity Indicates that the secure Fabric OS was enabled by the secModeEnable command. Verify that the security event was planned. If the security event was planned, there is no action required. If the security event was not planned, take appropriate action as defined by your enterprise security policy. INFO Fabric OS Message Reference Publication Number: 53-1000242-01 58-31