HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 90

2 AUTH-1036 Severity If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. ERROR AUTH-1036 Message , [AUTH-1036], ,, ERROR, , Invalid state for : port Probable Indicates that the switch received an unexpected authentication message. Cause Recommended Action Usually this problem is transient. The authentication might fail. Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and switchEnable commands. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1037 Message , [AUTH-1037], ,, ERROR, , Failed to response for : init_len , resp_len , port . Probable Cause Recommended Action Severity Indicates that a DH-CHAP authentication operation failed on the specified port due to mismatched response values between two entities. The error might indicate that an invalid entity tried to connect to the switch. Check the connection port for a possible security attack. Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and switchEnable commands. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. ERROR 2-12 Fabric OS Message Reference Publication Number: 53-1000242-01