HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 126

9 EM-1014 Recommended Action Severity If the fruInfoSet command was being run, try the command again; otherwise, the update is automatically reattempted. If it continues to fail, try reseating the FRU. If the message persists, replace the FRU. ERROR EM-1014 Message , [EM-1014], ,, ERROR, , Unable to read sensor on () Probable Indicates that the environmental monitor was unable to access the sensors on the specified FRU. Cause Recommended Try reseating the FRU. If the message persists, replace the FRU. Action Severity ERROR EM-1015 Message , [EM-1015], ,, WARNING, , Warm recovery failed () Probable Cause Recommended Action Severity Indicates that a problem was discovered when performing consistency checks during a warm boot. A reboot or power cycle is required to clear the situation. WARNING EM-1016 Message , [EM-1016], ,, WARNING, , Cold recovery failed () Probable Cause Recommended Action Indicates that a problem was discovered when performing consistency checks during a cold boot. Monitor the switch. 9-6 Fabric OS Message Reference Publication Number: 53-1000242-01