HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 428

58 SEC-1135 SEC-1135 Message , [SEC-1135], ,, INFO, , Secure fabric version stamp has been reset. Probable Cause Recommended Action Severity Indicates that the version stamp of the secure fabric is reset. Verify that the security event was planned. If the security event was planned, no action is required. If the security event was not planned, take appropriate action as defined by your enterprise security policy. INFO SEC-1136 Message , [SEC-1136], ,, ERROR, , Failed to verify signature . Probable Cause Recommended Action Severity Indicates that the receiving switch fails to validate the security database sending from the primary FCS switch. This message usually indicates that the data package is corrupted, the time stamp on the package is out of range as a result of a replay attack or out-of-sync time service, or the signature verification failed. Signature verification failure indicates either an internal error (such as losing the primary public key) or an invalid database. Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that switch. This message might also be the result of an internal corruption or a hacker attack to the secure fabric. ERROR SEC-1137 Message , [SEC-1137], ,, ERROR, , No signature in . Probable Cause Indicates that the receiving switch fails to validate the security database sending from the primary FCS switch. This message usually indicates that the data package is corrupted, the time stamp on the package is out of range as a result of a replay attack or out-of-sync time service, or the signature verification failed. Signature verification failure indicates either an internal error (such as losing the primary public key) or an invalid database. 58-34 Fabric OS Message Reference Publication Number: 53-1000242-01