HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 144

11 FABR-1008 Severity If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. WARNING FABR-1008 Message , [FABR-1008], ,, WARNING, , Probable Cause Recommended Action Severity Indicates that errors occurred during the request domain ID state; the information unit cannot be allocated or sent. If this message occurs with FABR-1005, the problem is usually transitory. Otherwise, this message is rare and usually indicates a problem with the Fabric OS. The error descriptions are as follows: • FAB RDI: cannot allocate IU • FAB RDI: cannot send IU No action is required if the message appears with the FABR_1005 message. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. WARNING FABR-1009 Message , [FABR-1009], ,, WARNING, , Probable Cause Recommended Action Severity Indicates that errors were reported during the exchange fabric parameter state; cannot allocate domain list due to a faulty EFP type. This message is rare and usually indicates a problem with the Fabric OS. The fabric daemon will discard the EFP. The system will recover through the EFP retrial process. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. WARNING FABR-1010 Message , [FABR-1010], ,, WARNING, , 11-4 Fabric OS Message Reference Publication Number: 53-1000242-01