HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 83

AUTH-1013 2 AUTH-1013 Message , [AUTH-1013], ,, WARNING, , Can not perform authentication request message: port , message code Probable Cause Recommended Action Severity Indicates that the system is running low on resources when receiving an authentication request. Usually this problem is transient. The authentication might fail. Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and switchEnable commands. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. WARNING AUTH-1014 Message , [AUTH-1014], , FFDC, ERROR, , Invalid port value to : port Probable Cause Recommended Action Severity Indicates an internal problem with the Secure Fabric OS. Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and switchEnable commands. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. ERROR AUTH-1017 Message , [AUTH-1017], ,, ERROR, , Invalid value to start authentication request: port , opcode Probable Indicates an internal problem with the Secure Fabric OS. Cause Fabric OS Message Reference 2-5 Publication Number: 53-1000242-01