HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 60

1 Viewing and Configuring System Message Logs Viewing System Messages from Web Tools This procedure is valid for the SilkWorm 200E, 3016, 3250, 3850, 3900, 4100, 24000, and 48000. To view the system message log for a switch from Web Tools: 1. Launch Web Tools. 2. Select the desired switch from the Fabric Tree. The Switch View displays. 3. Click the Switch Events button. A Switch Events Report displays. 4. View the switch events and messages. In dual-domain switches, an Event button exists for each logical switch. Only messages relating to that switch (and chassis) will be displayed. Dumping System Messages This procedure is valid for the SilkWorm 200E, 3016, 3250, 3850, 3900, 4100, 24000, and 48000. To display the system message log, with no page breaks: 1. Log in to the switch as admin. 2. Enter the errDump command at the command line: switch:admin> errDump Version: 5.0.1 2004/07/28-17:04:59, [FSSM-1002], 1,, INFO, switch, HA State is in sync 2004/07/28-17:04:59, [FSSM-1003], 2,, WARNING, switch, HA State out of sync 2004/07/28-17:04:51, [EM-1055], 3,, WARNING, switch, Media 27: Port media incompatible. Reason: Configured port speed. 2004/07/28-17:04:54, [FABR-1001], 4,, WARNING, switch, port 4, ELP rejected by the other switch 2004/07/28-17:05:06, [FW-1050], 5,, WARNING, switch, Sfp Supply Voltage 0, is below low boundary(High=3600, Low=3150). Current value is 0 mV. switch:admin> 1-6 Fabric OS Message Reference Publication Number: 53-1000242-01