HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 96

3 BL-1009 Severity If the message persists, replace the blade. CRITICAL BL-1009 Message , [BL-1009], , FFDC, CRITICAL, , Blade in slot timed out initializing the chips. Probable Cause Recommended Action Severity Indicates that the blade has failed to initialize the ASIC chips. Make sure that the blade is seated correctly. If the blade is seated correctly, reboot or power cycle the blade. Run the systemVerification command to verify that the blade does not have hardware problems. Refer to the Fabric OS Command Reference for more information on this command. If the message persists, replace the blade. CRITICAL BL-1010 Message , [BL-1010], ,, WARNING, , Blade in slot inconsistent with the hardware settings. Probable Cause Recommended Action Severity Indicates that a failover occurred while some hardware changes were being made on the previously active CP (such as changing the domain ID). No action is required. This blade has been reinitialized. Because reinitializing a blade is a disruptive operation and can stop I/O traffic, you might have to stop and restart the traffic during this process. WARNING BL-1011 Message , [BL-1011], , FFDC, CRITICAL, , Busy with emb-port int. for chip in minis on blade , chip int. is disabled. interrupt status=0x 3-4 Fabric OS Message Reference Publication Number: 53-1000242-01