HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 454

58 SEC-1320 SEC-1320 Message , [SEC-1320], ,, WARNING, , Non-acl domain tries to join a fabric with strict fabric wide policy Probable Cause Recommended Action Severity Indicates that a domain not supporting ACL tried to join a fabric with a strict fabricwide policy. No action is required. The domain is denied by disallowing all its E-ports from connecting to the fabric. WARNING SEC-1321 Message , [SEC-1321], ,, ERROR, , Failed secure mode enable command. Reason: . Probable Cause Recommended Action Severity Indicates that the security enable failed on the fabric because switch has conflicting configuration such as fabric wide consistency configuration or AD configuration. Verify that the security event was planned. If the security event was planned, run the fddcfg --fabwideset "" command or ad --clear command to clear the fabric wide consistency configuration or AD configuration and retry the secModeEnable command. ERROR SEC-1322 Message , [SEC-1322], ,, WARNING, , Some DCC policy is too large, distribution cancelled Probable Cause Recommended Action Severity Indicates that this fabric is not able to support a DCC policy with more than 256 ports. Reconfigure any policy that has more than 256 ports in member list, then save it. WARNING 58-60 Fabric OS Message Reference Publication Number: 53-1000242-01