HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 200

22 FSPF-1005 Probable Cause Recommended Action Severity Indicates that the specified remote domain ID is out of range. No action is required; the frame is discarded. ERROR FSPF-1005 Message , [FSPF-1005], ,, ERROR, , Wrong Section Id , should be , input port = Probable Cause Recommended Action Severity Indicates that an incorrect section ID was reported from the specified input port. The section ID is used to identify a set of switches that share an identical topology database. The section ID is implemented inside the protocol. The error message itself will indicate the mismatched section ID. It should be set to 0 for a nonhierarchical fabric. SilkWorm switches support only section ID 0. Use a frame analyzer to verify that the reported section ID is 0. Any connected (other manufacturer) switch with a section ID other than 0 is incompatible in a fabric of SilkWorm switches. Disconnect the offending switch. ERROR FSPF-1006 Message , [FSPF-1006], ,, ERROR, , FSPF Version not supported, input port = Probable Cause Recommended Action Severity Indicates that the FSPF version is not supported on the specified input port. Update the FSPF version by running the firmwareDownload command to update the firmware to the latest version. All current versions of the Fabric OS support FSPF version 2, which is the correct version. ERROR 22-2 Fabric OS Message Reference Publication Number: 53-1000242-01