HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 220

25 FW-1118 Probable Cause Recommended Action Severity Indicates that the number of fabric reconfigures has changed. The following actions can cause a fabric reconfiguration: • two switches with the same domain ID have connected to one another. • two fabrics have joined. • an E_Port has gone offline. • a principal link has segmented from the fabric. Verify that the cable is properly connected at both ends. Verify that the SFPs have not become faulty. An inexplicable fabric reconfiguration might be a transient error and might not require troubleshooting. INFO FW-1118 Message , [FW-1118], ,, INFO, , , is below low boundary(High=, Low=). Current value is . Probable Cause Recommended Action Severity Indicates that the number of fabric reconfigures has fallen below the low boundary. The following occurrences can cause a fabric reconfiguration: • Two switches with the same domain ID have connected to one another. • Two fabrics have joined. • An E_Port has gone offline. • A principal link has segmented from the fabric. A low number of fabric reconfigurations means that the fabric is functioning normally. No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. INFO FW-1119 Message , [FW-1119], ,, INFO, , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of fabric reconfigures has risen above the high boundary. The following occurrences can cause a fabric reconfiguration: • Two switches with the same domain ID have connected to one another. • Two fabrics have joined. 25-14 Fabric OS Message Reference Publication Number: 53-1000242-01