HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 429

SEC-1138 58 Recommended Action Severity Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that switch. This message might also be the result of an internal corruption or a hacker attack to the secure fabric. ERROR SEC-1138 Message , [SEC-1138], ,, INFO, , Security database download received from Primary FCS. Probable Cause Recommended Action Severity Indicates that a non-primary FCS switch received a security database download. Verify that the security event was planned. If the security event was planned, no action is required. If the security event was not planned, take appropriate action as defined by your enterprise security policy. INFO SEC-1139 Message , [SEC-1139], ,, ERROR, , THe RSNMP_POLICY cannot exist without the WSNMP_POLICY. Probable Cause Recommended Action Severity Indicates that the receiving switch fails to validate the security database sending from the primary FCS switch. This message usually indicates that the data package is corrupted, the time stamp on the package is out of range as a result of a replay attack or out-of-sync time service, or the signature verification failed. Signature verification failure indicates either an internal error (such as losing the primary public key) or an invalid database. Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that switch. This message might also be the result of an internal corruption or a hacker attack to the secure fabric. ERROR SEC-1142 Message , [SEC-1142], ,, INFO, , Reject new policies. . Fabric OS Message Reference Publication Number: 53-1000242-01 58-35