HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 88

2 AUTH-1031 Severity If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. ERROR AUTH-1031 Message , [AUTH-1031], ,, ERROR, , Failed to retrieve secret value: port Probable Cause Recommended Action Severity Indicates that the secret value was not set properly for the authenticated entity. Reset the secret value by using secAuthSecret command. Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and switchEnable commands. ERROR AUTH-1032 Message , [AUTH-1032], ,, ERROR, , Failed to generate for payload: length , error code , port Probable Cause Recommended Action Severity Indicates that the authentication process failed to generate a particular data (that is, challenge, nonce, or response data) for an authentication payload. This usually relates to internal failure. A nonce is a single-use, usually random value used in authentication protocols to prevent replay attacks. Usually this problem is transient. The authentication might fail. Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and switchEnable commands. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. ERROR 2-10 Fabric OS Message Reference Publication Number: 53-1000242-01