HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 328

34 IPS-1004 Probable Cause Recommended Action Severity Indicates that memory resources are low. This might be a transient problem. If the message persists, check the memory usage on the switch, using the memShow command. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. WARNING IPS-1004 Message , [IPS-1004], ,, WARNING, , Port Config Mode Mismatch slot () port(ge): current mode is () Probable Cause Recommended Action Severity Indicates that configured Port Mode is different from intended use. Change the port configuration (by deleting configured FCIP tunnels or iSCSI sessions) to return the port mode to neutral before attempting to configure the port for a different mode or use. WARNING IPS-1005 Message , [IPS-1005], ,, WARNING, , Tunnel Authorization Failure for slot () port(ge) tunnel ID() reason () Probable Cause Recommended Action Severity Indicates that tunnel setup failed due to authorization failure from the remote side. Reasons for such failures could be a WWN Mismatch. Change the tunnel configuration on one side of the tunnel to authorize remote side to setup tunnel. WARNING IPS-1006 Message , [IPS-1006], ,, WARNING, , Tunnel Configuration Mismatch for slot () port() tunnel ID() reason () 34-2 Fabric OS Message Reference Publication Number: 53-1000242-01