HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 215

FW-1043 25 FW-1043 Message , [FW-1043], ,, WARNING, , , is above high boundary(High=, Low=). Current value is . Probable Cause Recommended Action Severity Indicates that the transmit power value of the SFP has risen above the high boundary. The transmit performance area measures the amount of outgoing laser to help you determine if the SFP is in good working condition or not. If the counter often exceeds the threshold, the SFP is deteriorating. Replace the SFP. WARNING FW-1044 Message , [FW-1044], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Recommended Action Severity Indicates that the transmit power value of the SFP has changed from a value outside of the acceptable range to a value within the acceptable range. The transmit performance area measures the amount of outgoing laser to help you determine if the SFP is in good working condition or not. If the counter often exceeds the threshold, the SFP is deteriorating. No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. INFO FW-1045 Message , [FW-1045], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Recommended Action Indicates that the value of the SFP voltage has changed. If the supplied voltage of the SFP transceiver is outside of the normal range, this might indicate a hardware failure. No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. Frequent messages indicate that you must replace the SFP. Fabric OS Message Reference Publication Number: 53-1000242-01 25-9