HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 287

FW-1435 25 FW-1435 Message , [FW-1435], ,, WARNING, , Switch status change contributing factor Flash: usage out of range. Probable Cause Recommended Action Severity Indicates that the switch status is not in a healthy state. This occurred because the flash usage is out of range. The policy was set using the switchStatusPolicySet command. Run the saveCore command to clear out the kernel flash. Refer to the Fabric OS Command Reference for more information about this command. WARNING FW-1436 Message , [FW-1436], ,, WARNING, , Switch status change contributing factor Marginal ports: marginal ports. (Port(s) ) Probable Cause Recommended Action Severity Indicates that the switch status is not in a healthy state. This occurred because the number of marginal ports is greater than or equal to the policy set using the switchStatusPolicySet command. A port is faulty when the port value for Link Loss, Synchronization Loss, Signal Loss, Invalid word, Protocol error, CRC error, Port state change or Buffer Limited Port is above the high boundary. Replace any faulty or deteriorating SFPs. WARNING FW-1437 Message , [FW-1437], ,, WARNING, , Switch status change contributing factor Faulty ports: faulty ports. Probable Cause Recommended Action Indicates that the switch status is not in a healthy state. This occurred because the number of faulty ports is greater than or equal to the policy set by the switchStatusPolicySet command. A port is considered faulty due to hardware failure such as a faulty SFP or port. Replace any faulty or deteriorating SFPs. Fabric OS Message Reference Publication Number: 53-1000242-01 25-81