HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 480

65 TRCE-1003 TRCE-1003 Message , [TRCE-1003], ,, ERROR, , Trace dump< optional slot indicating on which slot the dump occurs > was not transferred due to FTP error. Probable Cause Recommended Action Severity Indicates that a trace dump has been created on the switch or the indicated slot but is not automatically transferred from the switch due to an FTP error, such as a wrong FTP address, FTP site down, or network down. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. ERROR TRCE-1004 Message , [TRCE-1004], ,, WARNING, , Trace dump< optional slot indicating on which slot the dump occurs > was not transferred because trace auto-FTP disabled. Probable Cause Recommended Action Severity Indicates that trace dump files have been created on the switch or the indicated slot but are not automatically transferred from the switch because auto-FTP is disabled. Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. WARNING TRCE-1005 Message , [TRCE-1005], ,, ERROR, , FTP Connectivity Test failed due to error. Probable Cause Recommended Action Severity Indicates that the connectivity test to the FTP host fails, because of an FTP error such as a wrong FTP address, an FTP site down, or the network being down. Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Note: You can also run the traceFtp -e command to enable auto-FTP. ERROR 65-2 Fabric OS Message Reference Publication Number: 53-1000242-01