HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 396

58 SEC-1003 Severity ERROR SEC-1003 Message , [SEC-1003], ,, WARNING, , Fail to download security data to domain after retries Probable Cause Recommended Action Severity Indicates that the specified domain number failed to download security data after the specified number of attempts. The primary switch will segment the failed switch after 30 tries. The failed switch might have had some internal error and failed to accept the database download. Reset the version stamp on the switch to 0 using the secVersionReset command and then rejoin the switch to the fabric. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. WARNING SEC-1005 Message , [SEC-1005], ,, INFO, , Primary FCS receives data request from domain Probable Cause Indicates that the primary FCS received a data request from the specified domain. For example, if the switch fails to update the database or is attacked (data injection), a message is generated to the primary FCS to try to correct and resync with the rest of the switches in the fabric. Recommended Use the secFabricShow command to verify that the fabric is not being attacked by unauthorized users. Action Severity INFO SEC-1006 Message , [SEC-1006], ,, WARNING, , Security statistics error: Failed to reset due to invalid . Probable Cause Indicates that invalid data has been received for any statistic-related command for security (secStatsShow or secStatsReset). The counter is updated automatically when a security violation occurs. This message might also occur if the updating counter fails. 58-2 Fabric OS Message Reference Publication Number: 53-1000242-01