HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 345

MFIC System Messages Chapter 41 MFIC-1001 Message , [MFIC-1001], ,, ERROR, , failure at sysmod_scn registry rc= Probable Cause Recommended Action Severity Indicates that the system is temporarily out of resources. No action is required; this message is often transitory. If the message persists, run a switch reboot or an haFailover (if applicable). If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. ERROR MFIC-1002 Message , [MFIC-1002], ,, INFO, , Chassis FRU header not programmed for switch NID, using defaults (applies only to FICON environments). Probable Cause Recommended Action Severity Indicates that custom switch node descriptor (NID) fields have not been programmed in nonvolatile storage. The default values are used. The Switch NID is used only in the following SB ELS frames: Request Node Identification Data (RNID) and Registered Link Incident Record (RLIR). The use of SB-3 link incident registration and reporting is typically limited to FICON environments. No action is required if SB-3 link incident registration and reporting is not used by the host or if default values are desired for the switch node descriptor fields. INFO Fabric OS Message Reference Publication Number: 53-1000242-01 41-1