HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 81

AUTH-1007 2 Probable Cause Recommended Action Severity Indicates an internal problem with the Secure Fabric OS. Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and switchEnable commands. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. WARNING AUTH-1007 Message , [AUTH-1007], ,, ERROR, , The proposed authentication protocol(s) are not supported: port . Probable Cause Recommended Action Severity Indicates that the proposed authentication protocol type or types are not supported by the local specified port. Run the authUtil command to make sure the local switch supports the specified protocols: FCAP or DH-CHAP. ERROR AUTH-1008 Message , [AUTH-1008], ,, ERROR, , No security license, operation failed. Probable Indicates that the switch does not have a security license. Cause Recommended Verify that the security license is installed using the licenseShow command. If necessary, reinstall the Action license using the licenseAdd command. Severity ERROR AUTH-1010 Message , [AUTH-1010], ,, ERROR, , Failed to initialize security policy: switch , error . Fabric OS Message Reference 2-3 Publication Number: 53-1000242-01