HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 135

EM-1055 9 EM-1055 Message , [EM-1055], ,, WARNING, , : Port media incompatible. Reason: Probable Cause Recommended Action Severity Indicates that an incompatible port media is detected. The possible causes are: • The port media is not capable of running at the configured port speed. • The port media generates too much heat to be used in the slot. Verify that the media can be run at the configured port speed. If the port media is extended long wavelength, move it to a port that can support the heat generated. WARNING EM-1056 Message , [EM-1056], ,, WARNING, , : Port faulted. Reason: Probable Cause Recommended Action Severity Indicates a faulty port media is detected. The reason code for this message is for internal use only. This message is valid for only the SilkWorm 4100 and 4900. Replace the defective SFP. WARNING EM-1057 Message , [EM-1057], ,, WARNING, , Blade: is getting reset: Probable The switch is automatically reset due to known resetable transient errors, such as bloom parity. error. Cause Recommended No action is required if the switch does not reach the reset threshold for the switch/blade. If the reset Action threshold is reached on the switch/blade, the switch/blade will be faulted and should be replaced. Severity WARNING Fabric OS Message Reference Publication Number: 53-1000242-01 9-15