HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 176

18 FCR-1024 Recommended Action Severity You might need to limit the number of port WWNs required by limiting the remote edge fabric connectivity (which limits the number of translate domains). You can also limit the number of proxy devices for a translate domain (which limits the number of translate domain ports required) by limiting the devices specified in LSAN zones. WARNING FCR-1024 Message , [FCR-1024], ,, WARNING, , Local LSAN zone device entries for edge LSAN exhausted. Probable Cause Recommended Action Severity Indicates that the number of devices in an LSAN defined in the edge fabric is greater than allowed by the local LSAN zone database limitations. Remove excess device entries from this LSAN zone until the number of devices is within the range of the local LSAN zone database limitations. WARNING FCR-1025 Message , [FCR-1025], ,, WARNING, , Local phantom node WWN entries exhausted. Probable Cause Recommended Action Severity Indicates that the number of node WWNs detected to be in use is greater than the local node WWN resources. You might need to limit the number of node WWNs required by limiting the remote edge fabric connectivity (which limits the number of translate domains). WARNING FCR-1026 Message , [FCR-1026], ,, INFO, , Node WWN roll over. Probable Indicates that the node WWN pool has rolled over and WWN entries detected to not be in use are reused Cause as needed. 18-8 Fabric OS Message Reference Publication Number: 53-1000242-01