HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 505

ZONE-1006 73 ZONE-1006 Message , [ZONE-1006], ,, WARNING, , WARNING - WWN() in HARD PORT zone . Probable Cause Recommended Action Severity Indicates that one or more devices are zoned as WWN devices and also zoned as devices. The device(s) are used to specify zone members over separate zones. If hardware zoning enforcement is preferred, edit the zoning database to have the device zoned using only one specification type, either WWN or . WARNING ZONE-1007 Message , [ZONE-1007], ,, INFO, , Ioctl() in () at port () returns code () and reason string () Probable Cause Recommended Action Severity Indicates that frame filter logic reported a failure during one of the IOCTL calls. The IOCTL call from which the failure is reported is listed as part of the error message. This is usually a programming error when adding CAM entries before the filter setup. There are two ways to avoid this problem. • Avoid having too many hosts zoned with a set of target devices at a single port. • Avoid having too many zones directed at a single port group on the switch. INFO ZONE-1008 Message , [ZONE-1008], ,, WARNING, , WARNING - port Out of CAM entries Probable Cause Recommended Action Severity Indicates that the total number of entries of S_ID CAM is above the limit while creating or adding a zone group. The maximum number of CAM entries allowed depends on the ASIC. If hardware zoning enforcement is preferred, edit the zoning database to have zoned PIDs for that port. WARNING Fabric OS Message Reference Publication Number: 53-1000242-01 73-3