HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 208

25 FW-1003 FW-1003 Message , [FW-1003], ,, WARNING, , , is above high boundary(High=, Low=). Current value is . Probable Cause Recommended Action Severity Indicates that the internal temperature of the switch has risen above the high boundary to a value that might damage the switch. This message generally appears when a fan fails. If so, a fan-failure message accompanies this message. Replace the fan FRU. WARNING FW-1004 Message , [FW-1004], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Recommended Action Severity Indicates that the internal temperature of the switch has changed from a value outside of the acceptable range to a value within the acceptable range. No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. If you receive a temperature-related message, check for an accompanying fan-related message and check fan performance. If all fans are functioning normally, check the climate control in your lab. INFO FW-1005 Message , [FW-1005], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Recommended Action Severity Indicates that the speed of the fan has changed. Fan problems typically contribute to temperature problems. No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. Consistently abnormal fan speeds generally indicate that the fan is malfunctioning. INFO 25-2 Fabric OS Message Reference Publication Number: 53-1000242-01