HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 187

FCR-1062 18 FCR-1062 Message , [FCR-1062], ,, INFO, , Port disabled, system only supports ports. Probable Cause Recommended Action Severity Indicates that the maximum number of supported ports was exceeded. To enable this port, disable any other operational port then re-enable the port. No action is required. INFO FCR-1063 Message , [FCR-1063], ,, INFO, , Fabric for switch with domain ID: mismatches with local fabric ID . Probable Cause Recommended Action Severity Indicates that the fabric ID of the switch does not match with the local switch. Run the switchShow command to display the fabric ID. Change the fabric ID to match on both ends by modifying either the local or remote host using the fcrConfigure command. INFO FCR-1064 Message , [FCR-1064], ,, ERROR, , Fabric ID of backbone FC-Routers mismatch or overlap. Probable Cause Recommended Action Severity Indicates that either the a backbone fabric split and both are connected to common edge fabrics, or the fabric ID of two backbone fabrics, which are connected to an edge fabric, are the same. If the backbone fabric split, merge the fabrics. If two (or more) backbone fabrics have the same IDs, make the fabric IDs unique using fcrConfigure command. ERROR Fabric OS Message Reference Publication Number: 53-1000242-01 18-19