HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 447

SEC-1253 58 SEC-1253 Message , [SEC-1253], ,, ERROR, , Bad DCC interface state during , state=. Probable Cause Recommended Action Severity Indicates that an internal error has caused the DCC policy update to fail in the provision, commit, or cancel phases. Retry the failed security command. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. ERROR SEC-1300 Message , [SEC-1300], ,, INFO, , This switch is in VcEncode mode. Security is not supported. Probable Indicates that the switch is set up with VC-encoded mode. Cause Recommended Turn off VC-encoded mode before enabling security. Action Severity INFO SEC-1301 Message , [SEC-1301], ,, INFO, , This switch is in interop mode. Security is not supported. Probable Indicates that the switch is interop-mode enabled. Cause Recommended Disable interop-mode using the interopMode command before enabling the Secure Fabric OS feature. Action Severity INFO Fabric OS Message Reference Publication Number: 53-1000242-01 58-53