HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 393

SCN System Messages Chapter 57 SCN-1001 Message , [SCN-1001], , FFDC, CRITICAL, , SCN queue overflow for process Probable Cause Recommended Action Severity Indicates that an attempt to write an SCN (state change notification) message to a specific queue has failed because the SCN queue for the specified daemon name is full. This might be caused by the daemon hanging or if the system is busy. The valid values for daemon name are: • fabricd • asd • evmd • fcpd • webd • msd • nsd • psd • snmpd • zoned • fspfd • tsd If this message is caused by the system being busy, the condition is temporary. If this message is caused by a hung daemon, the software watchdog will cause the daemon to dump the core and reboot the switch. In this case, run the saveCore command to send the core files using FTP to a secure server location. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. CRITICAL Fabric OS Message Reference Publication Number: 53-1000242-01 57-1