HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 136

9 EM-1058 EM-1058 Message , [EM-1058], ,, WARNING, , Switch gets reset: Probable Cause Recommended Action Severity The switch is automatically reset due to known resetable transient errors, such as bloom parity. error. No action is required if the switch does not reach the reset threshold for the switch/blade. If the reset threshold is reached on the switch/blade, the switch/blade will be faulted and should be replaced. WARNING EM-1059 Message , [EM-1059], , FFDC, CRITICAL, , Incompatible unit in faulted Probable Cause Recommended Action Severity Indicates that a FRU inserted in the specified slot is not compatible with the switch software. The blade will not be used. Replace the blade. Make sure the replacement is compatible with your switch type. CRITICAL EM-1060 Message , [EM-1060], ,, WARNING, , Stopping synchronization of the system due to blade incompatibility with software version on standby CP. Probable Cause Recommended Action Severity A blade in the system is not supported by the release on the standby CP. Please remove all blades of this type or upgrade your standby CP. Once an appropriate action is taken, this CP must be rebooted or haSyncStart must be run successfully. Until this is done, the system will remain out of synchronization. WARNING 9-16 Fabric OS Message Reference Publication Number: 53-1000242-01