HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 186

18 FCR-1060 Probable Cause Recommended Action Severity Indicates that the DH-CHAP authentication failed on the EX port. Verify that the shared secrets on both sides of the link match. Disable and enable the ports using the portDisable then portEnable commands to restart authentication. INFO FCR-1060 Message , [FCR-1060], ,, WARNING, , EX port() has an incompatible configuration setting. Probable Cause Recommended Action Severity Indicates that VC Link Init is enabled on the local switch and the remote switch is negotiating in R_RDY mode. The fabric might not form properly. Check the configuration on the local switch using the portCfgShow command to verify that the VC Link Init is disabled, if the remote switch is configured in R_RDY mode or only capable of R_RDY mode. VC_RDY mode: Virtual-channel flow control mode. This is a proprietary protocol. R_RDY mode: Receiver-ready flow control mode. This is the Fibre Channel standard protocol, that uses R_RDY primitive for flow control. WARNING FCR-1061 Message , [FCR-1061], ,, INFO, , Backbone fabric created on port . Probable Cause Recommended Action Severity Indicates that a backbone fabric was built on the specified port. No action is required. INFO 18-18 Fabric OS Message Reference Publication Number: 53-1000242-01