HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 409

SEC-1059 58 Probable Cause Recommended Action Severity Indicates that there has been a corruption during the distribution of the security database. This can only occur when the primary FCS is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. ERROR SEC-1059 Message , [SEC-1059], ,, ERROR, , Fail to to flash. Probable Cause Recommended Action Severity Indicates that the operation failed when writing to flash. Run the saveCore command to FTP files from the switch and remove them from the flash. ERROR SEC-1062 Message , [SEC-1062], ,, ERROR, , Invalid number of Domains in Domain List. Probable Indicates either that no domains or domains more than the maximum number supported are specified. Cause Recommended Enter the correct number of domains. Action Severity ERROR SEC-1063 Message , [SEC-1063], ,, ERROR, , Failed to reset statistics. Fabric OS Message Reference Publication Number: 53-1000242-01 58-15