HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 482

65 TRCE-1009 Severity CRITICAL TRCE-1009 Message , [TRCE-1009], ,, ERROR, , Unable to alert active CP that a dump has occurred. Probable Cause Recommended Action Severity Indicates that the standby CP is unable to communicate trace information to active CP. This message is only applicable to the SilkWorm 12000, 24000, and 48000. Run the haShow command to verify that the current CP is standby and the active CP is active. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. ERROR TRCE-1010 Message , [TRCE-1010], ,, ERROR, , Traced fails to start Probable Cause Recommended Action Severity Indicates that the trace daemon (traced), used for transferring trace files, failed to start. The trace capability within the switch is unaffected. Reboot the CP (dual-CP system) or restart the switch. Run traceFtp to set up for automatic FTP transfers. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. ERROR TRCE-1011 Message , [TRCE-1011], ,, INFO, , Trace dump manually transferred to target ' ': . Probable Indicates that a manual transfer of trace dump files has occurred. Cause 65-4 Fabric OS Message Reference Publication Number: 53-1000242-01