HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 471

SYSC System Messages Chapter 63 SYSC-1001 Message , [SYSC-1001], , FFDC, CRITICAL, , Failed to run : Probable Cause Recommended Action Severity Indicates that during the boot sequence, one of the programs would not run on the system. If the message is reported during a reboot after new firmware has been loaded, try reloading the firmware using the firmwareDownload command. If the message persists, there might be a conflict between the two versions of firmware or the nonvolatile storage might be corrupted. Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. CRITICAL SYSC-1002 Message , [SYSC-1002], , FFDC, CRITICAL, , Switch bring-up timed out Probable Cause Recommended Action Severity Indicates that the system timed out during a reboot or failover sequence, waiting for one or more programs to register with system services or to fail over to active status. The switch is in an inconsistent state and can be corrected only by a reboot or power cycle. Before rebooting the chassis, record the firmware version on the switch (or CP) and run the haDump command. If this is a dual-CP switch, then gather the output from the CP in which this log message appeared. CRITICAL Fabric OS Message Reference Publication Number: 53-1000242-01 63-1