HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 400

58 SEC-1029 Recommended Action Severity Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. ERROR SEC-1029 Message , [SEC-1029], ,, ERROR, , Invalid character in . Probable Cause Recommended Action Severity Indicates that a corruption occurred during the distribution of the security database. This can occur only when the primary FCS distributes the security database to the other switches in the fabric, then local validation finds the error in the security database. This is a rare occurrence. Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. ERROR SEC-1030 Message , [SEC-1030], , ERROR, , The length of the name invalid. Probable Cause Recommended Action Severity Indicates that a corruption occurred during the distribution of the security database. This can occur only when the primary FCS distributes the security database to the other switches in the fabric, then local validation finds the error in the security database. This is a rare occurrence. Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. ERROR SEC-1031 Message , [SEC-1031], ,, WARNING, , Current security policy DB cannot be supported by standby. CPs will go out of sync. 58-6 Fabric OS Message Reference Publication Number: 53-1000242-01