HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 193

FICU-1005 19 FICU-1005 Message , [FICU-1005], ,, ERROR, , Failed to initialize rc = Probable Cause Recommended Action Severity Indicates that the initialization of a module within the FICON-CUP daemon failed. Download a new firmware version using the firmwareDownload command. Refer to the Fabric OS Command Reference for more information on this command. ERROR FICU-1006 Message , [FICU-1006], ,, WARNING, , Control Device Allegiance Reset (Logical Path: 0x:0x) Probable Cause Recommended Action Severity Indicates that the path with the specified PID and channel image ID lost allegiance to a FICON-CUP device. Check if the FICON channel corresponding to the PID in the message is functioning correctly. WARNING FICU-1007 Message , [FICU-1007], ,, WARNING, , : Failed to allocate memory while performing Probable Cause Recommended Action Severity Indicates that memory resources are low. This might be a transient problem. If the message persists, check the memory usage on the switch, using the memShow command. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. WARNING Fabric OS Message Reference Publication Number: 53-1000242-01 19-3