HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 309

HIL-1503 28 Severity Make sure that the area is well ventilated and that the room temperature is within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. If the message persists, replace the blade. CRITICAL HIL-1503 Message , [HIL-1503], , FFDC, CRITICAL, , Slot , unit shutting down. Probable Cause Recommended Action Severity Indicates that the temperature of this blade has risen above the maximum threshold for at least two minutes. The blade is shut down to prevent further damage. This usually follows a high-temperature warning message. Run the fanShow command to verify all the fans are working properly. Make sure that the area is well ventilated and that the room temperature is within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. If the message persists, replace the faulty blade. CRITICAL HIL-1504 Message , [HIL-1504], ,, INFO, , System within normal temperature specifications ( C). Probable Cause Recommended Action Severity Indicates that temperatures in the system have returned to normal. No action is required. INFO Fabric OS Message Reference Publication Number: 53-1000242-01 28-13