HP StorageWorks 2/16V Brocade Fabric OS Message Reference Guide (53-1000242-01 - Page 143

FABR-1005 11 FABR-1005 Message , [FABR-1005], ,, WARNING, , : port : status 0x () xid = 0x Probable Cause Recommended Action Severity Indicates that the application failed to send an async command for the specified port. The message provides additional details regarding the reason for the failure and the exchange ID of the command. This can happen if a port is about to go down. No action is required; this message is often transitory. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. WARNING FABR-1006 Message , [FABR-1006], ,, WARNING, , Node free error, caller: Probable Cause Recommended Action Severity Indicates that the Fabric OS is trying to free or deallocate memory space that has already been deallocated. This message is rare and usually indicates a problem with the Fabric OS. In case of severe memory corruption, the system might recover by performing an automatic failover. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. WARNING FABR-1007 Message , [FABR-1007], ,, WARNING, , IU free error, caller: Probable Cause Recommended Action Indicates that a failure occurred when deallocating an information unit. This message is rare and usually indicates a problem with the Fabric OS. In case of severe memory corruption, the system might recover by performing an automatic failover. Fabric OS Message Reference Publication Number: 53-1000242-01 11-3